home Fix label Vehicles label_important Vans category Ford

brakes building up pressure and binding on tranist T350 125 2002?

i drive down the road and after about 3 miles down the road with out touching the brakes the pedel build up applying the brakes on solid then stop engine ok put new servo and mastercylinder on and still the same thanks george is a ford tranist T350 125 52 plate

george pritchard, November 2011

home Fix label Vehicles label_important Vans category Forddone

how do you release brake after it's binding?

k, November 2011

ummm adjusted correctly ?.pleanty off free play on pedal ,pedal return spring ok?.are you certain its the front and not the rear brakes that's locking.

ozone, November 2011

all pedal linkage servo and master cylinder all new

george pritchard, November 2011

have you checked the pedal adjustment,make sure you have free play,check pivot for seizure.if pedal incorrectly adjusted then pressure build up when engine started.check the pedal to servo pushrod linkage for seizure.

ozone, November 2011

put new rubber brake hoses on and just had system fluid renewed but it builds up when u dont put ur foot on th brake thanks

george pritchard, November 2011

check the front brake hoses,they can collapse.have you over filled the reservoir?.when was the last time you flushed and renewed fluid .

ozone, November 2011

link Click here to see other fixes for Ford.