My zanussi FJS1025W starts washing on a program but after 10 mins it stops and will not progress any more. if you switch it of and re start a program from the begining it will then more often than not continue all the way through. Has any one any ideas?

Richard German, December 2011

air chamber in the filter manifold might be blocked

ck, December 2011

there is a couple of resons for this one is the pressure switch and the other is the heating elements try these 2 things remove all power take the lid of the pressure switch is located at the top of the machine connected to a small black hose remove the hose from the switch and blow down it this should be clear some times a bit of powder gets stuck in it the other is the heating element check there is no loose wires to the element located at the back of the machine sit in the drum at the bottom and check with an electrical tester there is current going between them if not need replacing

willie gray, December 2011