narnia asked ... Matsui ct-111ss?    |    Jason asked ... How to fix handset problems ( intercom ) and access control?    |    andy asked ... Samsung VP-D60 camcorder?    |    Shopper asked ... Poor Renault Radio Reception?    |    reg bardle asked ... Lg 7kg dd?    |    Click here to ask your question

jetsystem zanussi 1400?

the washer has done the cycle but has a 1 minute left time flasshing up on it and wont let me open the door any ideas plz
joan, December 2011
to much soap suds can cause this by blocking the pressure hose
Extending the waste hose can also cause it
check filter as suggested

ck, December 2011
Sounds like its aborted the final spin.If there isn't any water in the drum,end the program and respin.if the machine doesn't spin then replace the carbon motor brushes.If the machine does spin and finish its cycle,but you cannot open the door,then you have a problem with the door interlock.

ozone, December 2011
Might not of drained properly, If you have a filter on the front, behind the low kick panel, take it out, you will get some water with it, clean filter for the next time, as letting the water out, should clear it. assuming it is that

SD, December 2011
link Click here to see other fixes for Zanussi.