hiya i have a problem with me abs breaks when i break in snow the break pedle vibrates and its harder to break,but if weathers okay its fine do i after change the front shoes...and also ive changed my battery in me key fob and it dont work could you help me out thanks..

geff, January 2012

thanks guys for comments,im sure there sumat up with abs cause when i do break the break vibrates bad and its hard to break and i wasnt even going fast had to pul hb up before i smashed in back of a taxi lol if i need new break pads for front will it afect the abs...

geoff, January 2012

The pedal vibrating is the ABS working as it should!! it is pulsating the pressure to the brake system to stop the wheels from locking up and reduce the risk of skidding.

To re-sync the remote,

Ignition ON-OFF 6 times in 10seconds
Do not remove key from ignition!
After 2 seconds indicators will flash twice
Programming mode now avail for 2 mins
Press and hold down the UNLOCK button
Press the LOCK button 3 times
Release the UNLOCK button
Indicators will flash ONCE to indicate correct programming
Switch ignition ON Indicators will flash TWICE
Programming mode now de-activated
Check operation of remote

nigel, January 2012

It sounds as if your ABS is working properly. It will do that on packed snow.

To resynchronise your key fob see here:

http://www.keyfobrepair.co.uk/Key_fob_Resynchronizing_instructions..htm

Good luck.

ChicksFan, January 2012