The washer starts is cycle as normal but doesn't stop filling. I've taken the top off and had a look - no burnt out contacts. On the left hand side towards the back there are 6 plugs, green white and red. If I pull out one of the red plugs the water stops but I've followed the wire through the machine and found no obvious problems. If I put the contact back in the water starts running again. I'm stumped. Any ideas?

Joanne, October 2006

Thanks Phil. I've blown down the hose and I just hear a bubbling sound. Its still filling so I guess I'm off to buy a new switch! Thanks for your help. Jo

Joanne, October 2006

hi joanne its a faulty water pressure switch (POWER OFF) under lid to one side you will find a round switch unit with wires going to it.it will also have a rubber tube connected to the bottom of it remove tube and blow down it,put tube back and try to fill again if it still overfills you need a new switch

phil grimshaw, October 2006