Take off the plastic cover below the front panel.
In there is the filter.
Put a towel and dish down.
Slacken the filter a little to drain the water out.
Tighten the filter when you need to empty the dish.
Once the machine is empty, take the filter out and clean out any debris in there.
Look into the filter housing and you'll see the pump impellor.
Turn this through 360 degrees with a screwdriver.
If it won't turn, there's something in there jamming it and you need to get it out.
If it's all ok, take the clothes out of the machine.
Put it on a spin only programme (no rinse).
Look into the open filter housing, i the impellor should be turning,if it doesn't the pump has faild.
paul, January 2012
