stat has power going and leaving it the element has power to both heating elements but stil wont heat the stats at back of heating element has coninutiy through them wondering wat else could b wrong did replace element stil no good

mike 11 jan 2012, January 2012

the stats on back of heater ar fine tested them wit my continuity tester i fitted a new heater but no joy wit it seems that there is a problem wit the neutral comming to the heater as its seems the neutral is wired through the stats at back then on to element. is there another stat on this modle besides the front stat and the two at back of heater

mike 11jan 2012, January 2012

That's the front T/stat.There are a further two,fitted to the heater assembley.What's the part no of the heater assembley fitted.Should be a 2000watt........Part No. 1254365420

paul, January 2012

i checked the stat on the bottom left hand side just along side motor did not see any other one in this modle

mike 11 jan 2012, January 2012

which stat have you checked?

ck, January 2012