Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

tdc62p hotpoint?

hi i have just replaced the heater element to my tumble dryer as clothing wasnt warming/drying have changed a new part as it was obviously broken but they are still not heating / drying any idea what could be causing this ( could it be a thermostat needs replacing to )
this machine is only 18 months old

many thanks steve
steve downes, October 2006
2 sensors behind the rear cover about the size of 20p piece cost £13 to replace part number 1701583 one of them will have a grenn dot on the reverse. Simply remove old replace with new. Regards.

hugh, January 2007
Hi There, the orange wires go to the green dotted thermostat.
we had similar problem,i've replaced thermostats and heater element,however,still no heat any ideas?

Brian Pepper, October 2006
It may the thermostats, which are located just above the element. If you are looking at them one has a green dot, could you tell me if the wires going into that one are orange or blue as I pulled mine appart but didnt realise they were different until I had them in my hand

Iain, October 2006
link Click here to see other fixes for Hotpoint.