Assume belt broken.remove lid
pull the back panel away and the inner drum becomes loose.feed the belt down the back between the drum and the back panel.slide it over the drum to the same position as the old belt.refit back panel and drum in to correct position.lay tumble dryer on its side.remove cover plate (4 screws) on base.find belt and pull like hell until it is over the motor pulley.now rotate drum until belt is aligned with motor pulley.
ck, January 2012
it makes the normal noises when i switch it on (if that makes sense) just the drum doesnt turn not sure if its heating up i dare not switch it on case i damage it more
hope this helps you to help me :)
Silky, January 2012
if you cant hear the motor it could be problems on motor itself,burned starting cap or brushes,if you can hear motor it could be drive belt,only way to be certain open
