my zanussi washer.dryer doesnt seem to respond correctly to the programme i have reset the board done this Turn the dial to off.

Press and hold the 2 buttons again.

While holding, turn the dial 1 click clockwise.

The leds should flash, release the buttons and the leds scroll.



If they do, turn the dial clockwise to off again.

Then to any programme and back to off. - then tried a drying session got an ele code and now have water in the drum

melanie, January 2012

if the leds scroll don,t turn to OFF turn to position 2 then 3 then 4 etc each will perform a function until you get to the flashing led fault code possible position 10?

ck, January 2012