hi all
I have no heat from my dryer and I have look at a lot of other post on this web site and I’m still not sure what to do. i have checked the thermostats and they have not propped (concaved) checked for any burnt wires and done a continuity test on the elements and it seems fine. Should I just replace the thermostats and hope this will fix it?

sammy, February 2012

thanks for your reply

how ever im not to good with the abbreviations, cct, m/c and triac

sammy, February 2012

Not a lot to go wrong on TD's. you checked heater, As long as not short/open cct ok. next thermostat, should read short cct when cold, open cct when at temp. other than that control cct, varies by m/c relay or triac. both can be replaced, But is it relay or triac, or control cct. can only be found by tests. Repost if needed.

SD, February 2012