The dishwasher a zanussi zsf 6161, its not taking in the water , the inlet valve was replaced, it worked for 2 washes then on the third wash, it stopped about an hour into washing, it is reading 20 in display, flashing, which says in the book the sink spigot is blocjed or check the water drain hose connection , weve done this but to no avail, is the programme gone then

susan palo, February 2012

you need to check drain pump.could be something floating around jamming the drain pump impeller.remove the filter and then soak all the water out of the sump and check if anything is in there blocking the hole that feeds through to the drain pump.Remove drain pump and check it and if needs be replace with a new one

ck, February 2012