home Fix label Security Systems label_important Home Alarm Systems category Accenta

Accenta G4?

Cut cable wires spliced correctly and insulated.
The alarm was set off when the cable was cut, so I assumed the fuse/fuses were ok.

The system is not under contract, is it probable the alarm has been installed in such a fashion that it requires the installation engineer to repair/re-set?

Alex Scott, February 2012

home Fix label Security Systems label_important Home Alarm Systems category Accentadone

he not say where the fuse was blown,alarm guy,could have been in the panel.,but hey ho ,its fixed :-)

gts, March 2012

Should have been a 3 AMP fuse in the FCU.

Alarm, March 2012

thank you for your reply,glad to be of service

gts, March 2012

Thank you very much, it was a 1amp fuse.

Alex Scott, March 2012

remove the fuse from the spur unit that feeds mains power to the panel,open the panel,check any fuses with a test meter,replace any blown fuse,close panel,replace the fuse in spur unit,then press reset,your panel is a budget one,so i doubt it has been programmed as engineer reset ,

gts, February 2012

So what is your question?

Never assume.

SD, February 2012

link Click here to see other fixes for Accenta G4.