Sometimes at the end of a cycle there is a lot of dirty water left, I can use the start button to empty it so the pump is working, what tells the electronics that the machine is empty.

Alan, March 2012

Thanks for the reply, the problem is that it may do it 2or 3 washes on the trot and then work ok for the next 4 or 5. I will certainly check under the filters again but if I use the start sequence a few times to empty the machine the pump works ok. I've recently moved the machine and took the opportunity to check the discharge hose (this has been an ongoing problem for quite some time) and it seemed ok. Do I have to pull the machine out again to get to the pump? I've a nast feeling that this could be an electronic problem.

Alan, March 2012

I think its a timed sequence so nothing tells it it is empty.it could be over filling or may be there is something that got through the filter and is in the sump floating about causing it not to drain.drain all the water out the sump under the filter and check.also check inside the drain pump impeller.check the drain hose

ck, March 2012