Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

my white knight 44aw is not drying but goes through the cycle?

how can i repair the white knight 44aw.
the clothes are completely wet after a full cycle - the heating does not work.
are there any trips that can be reset or do i change the heating element
John Walters, March 2012
How to wire heating element

James, October 2013
The first thing to check is the reset button on the rear of the appliance.
Pull the machine out and press the red button.
If it clicks, try the appliance again.
 
If that doesn't fix the issue you will have to meter the element and T/stats,

Any that have open circuits will need replacing,

also check the wiring for continuity,

if my memory serves me correctly there is a T/stat fitted to the exhaust duct
(fan housing), on occasions if their is a restriction in the exhaust vent it takes out this stat.

paul, March 2012
before changing element check thermostat first for close circuit,by putting direct power onto element is a sure way of testing for working.follow the wires to and from element and thermostat to see if their may be other trips or thermostats

jj, March 2012
link Click here to see other fixes for White Knight.