which two LEDs ?
there's more than seven fascia panels for your model,.
Common faults for aborting the cycle is a water heating fault,or no motor action,or a fault with the drain pump,.
Have you removed the filter and checked that the drain pumps impeller turns freely ?,.
the drain pump runs for several seconds on initiation,but the machine can still fill then abort.
Pull the mains plug and remove the filter from the front of the machine,the filter location is on the right hand side,either on front or behind the bottom kick panel.
Remove inspect and check the pumps impeller,it maybe jammed with something,it should rotate freely.
paul, April 2012
