GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Bosch maxx900 washing machine won't wash or spin?

Hi I have a Bosch 900 front loader washing machine it is 7 years old. It goes thru the whole cycle, brings in water, drains but the drum does not move during the wash cycle or spin cycle. I checked to see if the drive belt was broken but it was still in tact. Any advice would be appreciated
Tony, April 2012
Hi All

How do you remove the drum from a MAXX WAE18060 front loader.

It appears tha the drum has dropped in the plastic inner shell

Many thanks

Stewart, June 2012
Also try earths & connectors to brush assemblies. May be loose Also filter box at bottom front right. May be blockage. A $2 coin can cause blockage and inhibit drain/spin. Good luck

Justin, May 2012
Problem most likely carbon brushes in the motor worn. (they are black carbon strips with a spring behind to pass elctricity to the armature, the rotating part.) Remove wire from them and slide brass tag to get them out these black strips are what should be 8mm long.

Kenjo, April 2012
Thanks jj, is the brave clutch assy part of the motor? As I have managed to pull the motor off and was going to get it tested. Also what do you mean need to be more than 8 mm long at least?

Cheers

Tony, April 2012
problem with brake/cluth assy or worn brushes on motor,need to be more than 8mm long at least

jj, April 2012
link Click here to see other fixes for Bosch.