I have had to replace the abs rings on a Hyundai trajet diesel. but when goint to refil the gearbox I can't seem to see a suitable bung for refilling. I did see a bold on the front of the box but when I removed it the hole was not big enough to get anything in and the bolt was longer than any bung I have seen before. Help please..

Michael Mc Feely, May 2012

Have worked on cars for many years but never this. Have looked at a book and what they suggested was a bung was definately not. Bolt was too long and narrow. Did find what looked like a bung round the diff right enough just to the right and above the driveshaft.

michael, May 2012

I would not remove any bolt from a g/box casing unless I knew what it was holding/securing and was sure it was the filler plug,it is there for a reason and hopefully it wasn`t securing anything inside the g/box,I haven`t worked on one of these but would have a look round about the diff. area and end casing,if in doubt buy a manual

cdc, May 2012