how can I repair my ford bantam immobiliser, it has a samcor label on the unit. my vehicle is a 1999 model. when you insert the plug, the light continues to flash thus dissabling the the ignition, I have since found there is no power to the starter and coil, my fuel pump was replaceced with an electrical unit, this also does not work. any help on this please, or can you assist me to by-pass the immobiliser. hot wire. thank you.

Mike, June 2012

ps it might be as simple as both your circuts are out the live fuse that runs it is blown. this will more than likley be hidden in wiring but will be connected to a main ing live to feed it

bob, June 2012

told you when you asked last time how to remove it.this just puts it back as it was before fitting it.if you want to get into it find the black box,take the lid off inside are 2 relays.usually they are dirty and not making contact so the compolents they run do not work.one runs the starter wire to starter soliniod .the other the fuel pump,ing coil,ect. all run from ing switch so rejioning the wires makes it back standard.the best thing to do is remove or renew as once they get worn they are not to be trusted as relays drop out and you get this problem

bob, June 2012

there's a chap on ebay who may be able to help,his user name is manandvan but he will check you out before he gives you any advice & it will cost you

GHOST, June 2012

you will not get anyone on here telling you how to hotwire a car

cdc, June 2012