I have no water feeding through to the rear window washer. Initially when activating it the water leaked through the roof lining above the parcel shelf. After removing the small brakelight at the top of the screen to gain access to the back of the assembly the tubing was disconnected. I reconnected and secured it but now on activation there is still no feed to the window and no interior leak either. No obvious water coming from underneath the car so I,m baffled! Under the bonnet to the screenwash bottle and I can't see where the pipe attaches at the bottle either to see if it has disconnected there. Help!

Frustrated Fordowner, July 2012

hi take the rear brake light off again you need to blow through the part on the light fitting make sure its clear and whilst you have it unconnected hold the pipe clear of your car or put a bucket under it and try to do the washer with the pipe off some times it gets clogged up with crap inside the pipe if that dont work you need to suck on the pipe and see if that removes it hope this helps

steve, July 2012