how do i replace the seals on the gearbox where the cv-joints go in on a 1998-2000 corsa (F16) gearbox.

kcvs, August 2012

Thanks cdc. will give it a bash.

kcvs, August 2012

you will have to strip the suspension to enable the joints to pull out far enough,two bolts each side,18mm,at bottom of struts,they should just lever out of the g/box and also lever out the old seals,there will be a tool for inserting them but as long as they are in square and roughly where they were then it should be ok.The front calipers may have to be removed also.

cdc, August 2012