Hi there.

I have a Beko DRCS68S Condensor dryer. I have recently had to replace the front felt seal and the drive belt. This repair is great the drum turns now.
However the dryer is no longer pumping water to the drain tank. I have checked all electrical connections are secure and ensured that all of the drain pipe work is connected. Any ideas?

Mark, November 2012

have you tested the drain pump actually works?.test the resistance of the drain pump windings or if competent enough connect mains across the windings direct using a 3A fuse and a plug in 30mA rcd for protection

CK, November 2012