home Fix label Vehicles label_important Motorcycles category Peugeot

streetfight 2 centre stand?

My centre stand bolt has sheered off one end and its flapping loose how can i ger the bolt out as every thing i try it wont pull out so i can replace the bolt !!
My bike is a 2007 peugeot streetfight 2

seagull gaza, November 2012

home Fix label Vehicles label_important Motorcycles category Peugeotdone

Thanks for the advice Perry i will try loads of wd40 first hope that works if not hacksaw it will have to be :(

seagull gaza, November 2012

sounds like the bolt's rusted itself into the stand, if soaking it in wd40 for as long as possible doesn't loosen it you will have to cut it off the scooter and clamp the stand in a vice and hopefully the old bit can be knocked out with a bit of steel rod and hammer.

Perry, November 2012

link Click here to see other fixes for Peugeot.

Fix Fault - Vehicles

home label Vehicles label_important Motorcycles

home Fix label Vehicles label_important Motorcycles category Peugeot

streetfight 2 centre stand?

I can answer this question...

streetfight 2 centre stand?

I can answer this question ...

streetfight 2 centre stand?

April is sr 50 won’t start?

My DB50QT-11 won't accelerate and cuts out after 20 seconds of running?

Ford Galaxy immobilzer reset?

rieju rs2 50 no spark?

his tight spot?

piaggio zip?

xmax wobbles at 60 kmph when deceralting?

How to change oil pump on apache 100cc quad?