After running it for ten minutes or so it trips out electric . I have so far changed out the capacitor , thermal cut out and heating element . Has anyone got any ideas what the problem might be. It will run on the cold rinse cycle all the way through but no other programs

David cloke, January 2013

So you need to be considering what happens in your machine on a normal cycle at about the ten minutes mark that does not happen on a cold rinse cycle.

The two things that immediately come to mind are water heating and detergent dispersal.

As a diagnostic you might consider safely disconnecting these in turn to see if the machine makes progress. If it still trips then you have eliminated two possible causes at no cost other than your time.

Continuing good luck...

Peccavi, January 2013

Yes the flap opens

David cloke, January 2013

I have no qualifications or experience to pass comment but that has never stopped me...

Does not the detergent door get opened at about 10 minutes into the machine's cycle - when it trips the electric and you open the door - has the little flap been sprung?

Peccavi, January 2013