Our 4 year old machine sudddenly refused to power up. Did a quick check of the obvious - plug fuse, power at socket and then opened up the front, tested mains through on off switch all OK. No obvious cable faults and water etc OK. Now at this point suspecting the pcb. Switched mains off and went to bed - prepared to buy a new one next day. Turned on again next morning and the thing powered up! Ran one wash cycle OK switched off and then refused to switch on again. Any ideas???

BobK in UK, January 2013

you need to prove power is on to the main pcb when it appears to be not working.if power lost to main pcb at this point you need to check socket/plug/wiring/suppressor/door micro switch all the way back to pcb.If power is on to pcb but dead could be loom or pcb/display issue

CK, January 2013