Fan oven did not heat,element works. Selector faulty, fan oven worked when I switched wire to different terminal. Purchased new correct selector switch, like for like wiring !!! Only fan comes on no heat on any setting !! Change it back works as before,refit new same thing happens x2more times going mad. Should I change connectors ?

Simon, January 2013

And Simon - you really should be grateful for any answer you get - nobody is obliged to try to help you you know - people give up their time and their experience as a small act of love or charity - mostly you'll get nothing at all - sometimes a foreign coin and now and again some really helpful advice - a rarity perhaps.

It's like fishing - you don't get a bite with every cast.

Peccavi, January 2013

The question is written more in code than in plain language - and there is no mention of make or model which often helps.

So the fan oven did not heat...
But some element did heat up (not in the fan oven presumably)
But did this element heat up when it should have done so or did it get hot when it should not have?
A selector was faulty
The fan oven began working when a wire was moved to a different terminal - a diagnosis was made of a defective selector.
A new selector was fitted with (apparently) identical wiring but now nothing heats up but the fan does run.
The old arrangement was tried and then the new one and this was repeated twice more but the symptoms remained the same.

Simon fears insanity.

My judgement is that the replacement selector is not identical to the defective one - OR - wires are being inserted into the wrong terminals.

A continuity test to each load and an understanding of the selector connections might help solve the mystery.

Good luck...

Peccavi, January 2013

and am not being rude,am just trying to point out to you how daft your question is

mm, January 2013

well simon,do you know how m,any cookers are out there,??and they all work diff,that is why no one has bothered reply to you ,no make or model of the cooker given,or maby you think you have a universal oven that we al know about,thats like calling a garage and saying i need a new gear box for my car,now,take a guess what they will ask you ???

mm, January 2013

I did expect an answer, but a better one than that.

Simon, January 2013

do you really expect an answer ??since you have given no make of oven ,what you should have done before replacing bits was test the over properly with a test meter,or at the very least took a picture of the wiring of the switch,you will be better some one in who knows what they are doing

mm, January 2013