We have a Bosch Dryer Classixx WTE84102GB/05. Today it stopped working. I have emptied the condenser and the door is shut. When the program is set the START/STOP light comes on. At pressing START/STOP button it beeps twice but the machine does not start. What could be the problem?

TSV, February 2013

my Bosch Dryer Classixx WTE84102GB/05 is having a problem with the water reservoir at the top left of the machine, I have taken off the panel at the bottom, cleaned out the metal filter on the left and noted that there is a well of water to the back bottom of the machine, I have emptied it out but the problem reoccurs after very dry. can anyone advise

Candice O'Neill, September 2017

This is exact same problem I am experiencing. Any luck with diagnosis please?

Layla, September 2014

Hi TSV. I have exactly the same problem you describe. All seems to be working fine. No error codes. Just get two beeps (and no operation) when pressing START. Did you find the problem ? Thanks !

Dan, November 2013

Its TSV again. I have now used the test mode on the machine. Results:

Turned the dial to off.
Turned the dial to 6 o'clock position (Warm 40min location)
Pressed and held the low heat button, while holding this button turned the dial to 7 o'clock (Freshen up)
Waited 2 seconds.
Release the low heat button.

The start/stop light flashing
Drying light OFF
Iron Dry ON
Cupboard Dry OFF
Anti Crease/END OFF

Dial moved clockwise to Iron Dry Position
The start/stop light flashing
Drying light ON
Iron Dry ON
Cupboard Dry OFF
Anti Crease/END OFF

Dial moved clockwise to Cupboard Dry Position
The start/stop light flashing
Drying light ON
Iron Dry OFF
Cupboard Dry ON
Anti Crease/END ON

Dial moved clockwise to Very Dry Position
The start/stop light flashing
Drying light OFF
Iron Dry ON
Cupboard Dry ON
Anti Crease/END ON

Dial moved clockwise to OFF Position
All lights OFF

Any ideas what is wrong?

TSV, February 2013

Its TSV again. I have now used the test mode on the machine. Results:

Turned the dial to off.
Turned the dial to 6 o'clock position (Warm 40min location)
Pressed and held the low heat button, while holding this button turned the dial to 7 o'clock (Freshen up)
Waited 2 seconds.
Release the low heat button.

The start/stop light flashing
Drying light OFF
Iron Dry ON
Cupboard Dry OFF
Anti Crease/END OFF

Dial moved clockwise to Iron Dry Position
The start/stop light flashing
Drying light ON
Iron Dry ON
Cupboard Dry OFF
Anti Crease/END OFF

Dial moved clockwise to Cupboard Dry Position
The start/stop light flashing
Drying light ON
Iron Dry OFF
Cupboard Dry ON
Anti Crease/END ON

Dial moved clockwise to Very Dry Position
The start/stop light flashing
Drying light OFF
Iron Dry ON
Cupboard Dry ON
Anti Crease/END ON

Dial moved clockwise to OFF Position
All lights OFF

Any ideas what is wrong?

TSV, February 2013