home Fix label Security Systems label_important Home Alarm Systems category Scantronic

Scantronic fault?

we have a scantronic 9448 that has sounded off when mains power was restored following a power cut.I've used my code but it doesn't respond,how can I stop it please before the neighbours get really upset.

I hopefully await your advice.

Patrick j, February 2013

home Fix label Security Systems label_important Home Alarm Systems category Scantronicdone

not all the time acorn,i have a few that reverted back to fac defaults when a total power fail,:-)

gts, February 2013

9448 >>
The control panel can retain all programmed information and access codes if both mains and battery power fail. When power is restored the panel will simply need resetting with the customer or engineer's access code.

acorn, February 2013

alarm guy,he too busy with his boyfriend :-) besides this a complicated question for him to answer :-)

gts, February 2013

Write the date on the new battery for future reference,aim at changing every 4years,5max.

All the best with it and if you need anymore guidance,feel free to ask. :)

e manno, February 2013

Spot on for the thanks back.

NSI, where was you?

Alarm, February 2013

yes u need the battery,and thank you for the thanks

gts, February 2013

Nice one the default code did the trick yeh!,all appears normal now with power and day on,do I still need that battery now?.

I'll get the manual tomoz, thank's for your help chaps.

Patrick j, February 2013

Try entering 1234,

What does the keypad say, lights etc?

e manno, February 2013

and check the fuses inside with a meter,a duff battery can cause a fuse to blow replace any blown fuses with same type

gts, February 2013

the battery inside the control panel needs replaced turn off mains power before u open the panel,replace the battery like for like,you may have to reprog the panel,it may have reverted back to fac cons,ur code will now be 1234 to stop the alarm untill u reprog ur old pin back in key in 1234

gts, February 2013

link Click here to see other fixes for Scantronic 9448.