I have a Hoover SE220 which has a split in the valve hose, rendering the machine unable to spin. I wish to replace the hose, but am unable to figure out how to remove the front panel to gain access to the part.
Any help would be appreciated.

Max, February 2013

Why are you removing the front panel. You only need to remove the top. Watch the video.
Go to;http://www.espares.co.uk/advice/washing-machines/a/7/1408/how-to-replace-the-inlet-valve-on-a-washer-dr.html
Some machines have a 2 hidden top securing screws behind a small oval plastic blank about 7 inches from the front . When removed the top sides backwards

GB in Wales, February 2013