Jack up veh.support with stands for safety.Remove wheels.Lever off anti rattle springs from calipers.Remove black caps revealing caliper slide/securing studs-7mm hex and remove,remove caliper.A `G` cramp will press the caliper piston back in,remove caliper bridge and this allows the disc to be removed,clean off grease/protective film from disc and fit,on the caliper bridge clean up the contact surfaces where the pads mount and refit,apply copaslip to the pads mating surfaces,fit pad to piston and the outer pad to the bridge and apply the caliper back to its position and refit 7mm hex slides,again with copaslip,refit caps and the a/rattle spring.Same again for the other side.Good luck.
cdc, March 2013
