AEG T36840
Removing the door and then swapping the hinges and latch to the opposite side is a simple enough task.


Removing the door catch is straight forward but how do I gain access to it to allow me to reposition it with it's attached cable to the opposite side once covered by the blanking plate?

Do I need to remove the lid and work from within or can the filter housing be temporarily removed to allow me to move the latch with its cabling?

Jon, April 2013

telling everyone to turn off when posting over 50 answer a day can get a bit of a bore.Lets hope people have common sense when handling electrical goods.and as the site clearly states.
QUOTE "Attempting repairs can be dangerous.In many instances work should only be undertaken by a qualified professional.".

every answer I post should have this attached to the bottom of it as well in theory

Not having a go but there is only so many hours a day I can give for free to help the public and the amount of thanks I get i can write on the back of a very small matchbox !!!!!!!

CK, April 2013

remember to unplug the machine from mains first,ck always forgets to tell people that i notice

mm, April 2013

Muchos gracias CK

Jon, April 2013

lid off and hand down the back of the front panel between drum.

CK, April 2013