Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

how can I fix my chainsaw stihl a54 electronic?

It start on pulling and idler but when I rev up it stall and die. There is some petrol coming out the exhaust. How do I fix this problem
jonty, June 2013
you have low compresion due to a scored pistion or barrel. Not enough to stop it firing, but enough for it to lose compression once the engine has started to heat up due to metal expansion.

Effectively it's a write off.

pleasant, August 2013
Hi. Can try this . There is a fuel filter inside your fuel tank use a wire hook to lift it out. Remove filter from hose clean excess fuel from it then try blowing through it there should be no restriction in doing this. If there is replace it.

Michael, August 2013
sounds like the diaphram is gone, in the carb

fit a new one.

cg, July 2013