home Fix label Kitchen Appliances label_important Dishwashers

NEMO dishwasher wont start?

NEMO by Fisher and Paykel wont start. The Heavy wash light is flashing and it just beeps when i try to start it. Wont turn off either, that also just beeps when i push it.

carlin mcdonough, June 2013

home Fix label Kitchen Appliances label_important Dishwashersdone

Thanks. Tried this also and worked a treat. Was a broken wire on the handle

Hamish, April 2014

Thanks mate, A+++

carlin mcdonough, June 2013

Nice to know you have been able to fix. Thanks for the feed back, so many people on here don't bother to reply. By the way, for future reference you have a model DW820.

Linoln Appliance NZ, June 2013

bang on, the switch had fallen out of the handle. Put it back and we are away. Thank you so much for your assistance..........took only 10 mins but if i diddnt know to check the handle i wouldnt have guessed the switch hanging in the door would have had anything to do with it. You just saved me a fortune!!!

carlin mcdonough, June 2013

Ok it thinks the door is still open. If door is closed properly & you hear it click shut and it still does it then something is broken inside the handle. You need to first remove the lower outer door panel, then the top plastic top of door panel and look inside for anything broken on door handle or switch support.

Linoln Appliance NZ, June 2013

model sticker is worn and unreadable sorry. it gives 4 fast beeps when any of the buttons is pushed.

carlin mcdonough, June 2013

What is the model number on the label just inside on the left side of the door opening? There were 2 F&P Nemo models and both different. Does it give just one beep or a series of beeps?

Linoln Appliance NZ, June 2013