home Fix label Security Systems label_important Home Alarm Systems category Scantronic

Scantronic 9800 - c1 alternating t1 (Temper Fault)?

I am a homeowner. I need help to reset c1 T1 fault on my alarm system.

I have a SCANTRONIC 9800 ALARM SYSTEM.

I managed to rectify the BF by replacing the new battery. I then reset the system. Set the alarm on exit and when entered the house did not hear the chime on keypad. This indicated that my exit door information is not working as it should have given me C6 when I opened the door on exit. I tried to rectify this by attempting to reset the zones. In process I got c1 alternating with t1 system fault. I need help with this if possible.

Subhash, July 2013

home Fix label Security Systems label_important Home Alarm Systems category Scantronicdone

Me thinks the 9800 is one of the best scanny panels ever made.

She tell you exactly what's going on,unlike most of the rubbish out there.

Listen to gts and trace then correct the C1 tamper,it's not a return prob so that narrows it down.

Very smart panel you have there :)

e manno, July 2013

you ob not know ur alarm ,u don't get the chime on entry,it works only when the system is unset u have a tamper on zone one,the panel is telling you the prob,go find the tamper

gts, July 2013

link Click here to see other fixes for Scantronic 9800.