FORD CARGO BRAKES APPEAR TO HAVE LOW PRESSURE ON THE REAR NEARSIDE. HAVE REPLACED LOAD SENSOR, SHOES . HANDBRAKE IS GOOD. HAVE BLEED BRAKES.

COULD IT BE THE BRAKE MASTER CYLINDER.? ANY IDEAS
GRATEFULLY RECEIVED!

philip spencer, November 2006

brakes work front o/s with rear n/s and front n/s with rear o/s,
so if front are ok i would say your master cylinder is ok, try rear flix brake pipe this could be expanding under pressure instead of letting fluid through to your slave cylinders only way to test is to replace, hope this helps.

graham, February 2007