home Fix label Security Systems label_important Home Alarm Systems category Scantronic

hot to connect a deltabell plus to a scantronic 9200 panel?

I am trying to connect a scantronic 9200 panel ( very old!) To a pyronix deltabell plus.

A bit confused, however I have installed the bellboxes without a problem before(on texecom panels) any suggestions?? Please

kellogs, August 2013

home Fix label Security Systems label_important Home Alarm Systems category Scantronicdone

why you use a nice miss like the two zone panel ?we have about 1000 on contract brill panel,reliable,very simple how big are your premises ?jus being nosy

gts, August 2013

Six months on here can send any man crazy :),

Dealing with the general public on a daily basis keeps you sane,this site and some of the folks who use it can drive you insane.:D

e manno, August 2013

no we not crazy just don't suffer fools like him gladly mate

gts, August 2013

I have a scantronic panel that's 32 years old and still going strong

gts, August 2013

scantronic panels mate,in my opinon they are great ,simple to prog,very reliable,we use the I-on 16 radio unit,again very good,but the scanny bell box is rubbish so we use a wired bell box

gts, August 2013

Lmao, all I wanted was to fit a bellbox to a panel,

U lot are crazy, gts, I hear u, and e manno thanks again,

Out of curiousity wat panels u use gts? ;)

kellogs, August 2013

and one more thing e manno,the poor public who on this site think think they get expert advice from this fool,thats peccavi folks,dont put your life or your alarm system in his hands,coz he aint got a clue or any of the other forums that he chances his luck in ,you have been warned

gts, August 2013

you selfish bugger :-)I met your type before,em,i must taste this batch to make sure its ok before I give my friend gts some,before you know it its gone !!!!!!!:-)

gts, August 2013

Hick!,Hick, ah that badly wine....Ooops.... you know my memory is shot these days.

I've wrote it down now " don't forget a quart for gts".

There I'll keep you posted :)

e manno, August 2013

anyway e manno,wheres me barlywine wot I was promised my your fair self ??????you drink it in shed all by yourself ???as they say in Glasgow,get it telt !!!!:-)

gts, August 2013

peccavi if ever you in Glasgow give me a call,i will teach you some manners :-) am not hard to find just look out for GTS bell boxes my mobile number on it ,hope to see you soon :-)

gts, August 2013

ta for that e manno,i say what I think and if any one not like it,sod them,i will not blow sunshine up any ones bum just to be liked,if I think the gear they are using is rubbish I will tell them,if its hurts their feelings so be it,least they get the truth from gts as you know mate you do not get far in business telling customers lies ,we will never sell trash to our customers I would rather lose the sale,and I know you know exactly what I mean e manno,we are to old in the tooth for such nonsence as that idiot spouts

gts, August 2013

Still PMSL.........

No worries mate,if folk don't like what you say then they know what they can do.

At least you have the nuts mate....still PMSL, you are a fecking star mate :) :)

Ps who gives a fleck mate?. Not me lol.

eeee manno, August 2013

yea e manno micro wave table driven by a belt ,my my all those motors and gears I have replaced when I could have fitted a rubber belt !!!how daft am I ?

gts, August 2013

you know me e.manno I give away lots of gear free of charge to the guys on here it costs me dosh but I don't care because it gets their panel working and to have an idiot like him criticize me is a joke and what does he do?give rubbish advice just look at his posts in other forums e manno,you will wet yourself laughing condemnant qui non intellengent !!!!!

gts, August 2013

Lol love the microwave one gts,

Think this guys more loopy than his last loop circuit advice.

Belt driven turntable.........PMSL,

He's defo got the gab gts :D

e manno, August 2013

am sorry e manno but this idiot gets on my wick with his stupid and non helpful replys,just look up past posts of his,you will see what I mean he has the intelligence of a flea ,and that's an insult to the flea,and if the idiot has a prob with me bring it on :-)

gts, August 2013

peccavi at least I know what am talking about unlike you ,your advice is going to kill some one one of these days ,and lot of my replies are tongue in cheek but your far to thick to know this,a lot of the guys on here like to have fun at times,but we give good advice,and more important SAFE advice,unlike you,micro wave turn tables are driven by a belt ????up stream down stream when your trying to explain lighting circuits ???? you make me laugh pal,dont forget your lord finchly rubbish

gts, August 2013

Yep and you could use the relay terminals on the 9200 board for the strobe if the existing wiring has the spare cores.

Anyway probably shouldn't be saying this but the deltabell wiring?,

What's the worst thing that can happen by experimenting with wiring variants?????.

Blown fuse!!, exactly :D

Don't you carry lots of spares?,I did lol.

e manno, August 2013

Oooooo I must sound dumb, the b is the trigger lol, which aint 12v

So that's kinda straightforward :D thanks

kellogs, August 2013

Tex oddys are no problem, used them plentyful, but if I link the b to the s, wudnt that give the strobe a constant 12v which would mean its always on? :s am not sure maybe u can tell me, sorry for sounding dumb :o

The pyronix are very similar to the texs ;)
On the 9200 for the bell trigger there are two outputs + and -, so that's 12v at the + and bell trigger to the - correct?
The tr and ov are pretty clear to be fair.
Thanks a lot anyway mate :)

kellogs, August 2013

We only use elmdene or tex oddy's,both of which are not backlit like the pyronix.

Tex oddy wiring if it's any use to you :)

A+ TO +VE
B TO BELL TRIG
C TO TR
D TO OUTPUT OV
AT THE SOUNDER LINK B TO S OR USE THE RELAY.

Copied and pasted from my notes lol.

e manno, August 2013

Thanks e manno :) atleast for being polite

Which other bells, are easily compatible wit the 9200?? Is there one effectively designed for the 9200?
Thanks

kellogs, August 2013

Sorry we don't use pyronix sounder's.
The pairing of the two seems prety straight forward utilising links ,but I don't want to commit to an answer regarding equipment I have no working knowledge of.

Again sorry, but the deltabell is new to me.

Hope you get it sorted :)

e manno, August 2013

Well can anyone help?

kellogs, August 2013

He can't help himself kellogs - half his replies seem to lack the manners of normal social interaction.

I hope you eventually get the advice you need.

Good luck...

Peccavi, August 2013

I would appreciate some help, seriously 'gts', maybe it is 'rubbish' but its what I've got to work with, so any help, would be nice, cheers

kellogs, August 2013

Customer wants a backlit bellbox :(

kellogs, August 2013

Sorry for stating the obvious then jeez

Can u help or are u just goin to continue with the attitude?

kellogs, August 2013

but I see you are used to fit rubbish kit(texecom )its not too hard to work out mate,if you know what your doing

gts, August 2013

you don't need tell us its an old panel,why you want fit such rubbish to this grand old girl ?

gts, August 2013

link Click here to see other fixes for Scantronic 9200.