GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Troubl light is on?

I have an Ranger American alarm system that 7 years old. We have never used it as an alarm system, but it is on so it beeps when the doors and windows are open. The other day we had a power failure. After that it would beep every few seconds and the trouble light is on. I set and reset it and nothing seemed to work. I called the number on the system and was told that the battery is probably bad. After this the trouble light went out until today it started beeping and the trouble light is on. I replaced the battery but the light is still on but it doesn't beep. I never had a manual I would really like to get one if possible. Thank you
George, August 2013
You are welcome.

e manno, August 2013
I will try it. thanks for your time

george, August 2013
Or check out this site for the time and date programming chart.

http://www.dsc.com/index.php?n=library&o=view_documents&id=1

e manno, August 2013
http://cms.dsc.com/media/documents/all/PC1500_PC1550_UM_EN_NA.pdf

Not same model but command matrix same.

e manno, August 2013
It's basically alerting you to set the system time George.

Let me see if I can give you a link for the user manual.

e manno, August 2013
No. I don't know how to do that. I didn't know it has a clock

George, August 2013
When you powered back up after replacing the battery did you set the system time?

Set. The clock George :)

e manno, August 2013
I did and the #8 light cam on,ready light went off and the trouble light was flashing for about 15 or 20 seconds then the #8 light went off, the ready light came on and the trouble light is on steady. uou are right it is a DSC pcx .I did find a # on the end
18001721RO

gEORGE, August 2013
I did that and the #8 light came on ready light went off and the trouble light started flashing for about 15 or 20 seconds. Then #8 light went off ready light came on trouble is on steady. It is a DSC pcx.

George, August 2013
Go to the keypad and press [*] then [2]
Tell me what lights are lit or if LCD keypad what it says.

I've a sneaky feeling the system is one of the DSC pcx range.

e manno, August 2013