home Fix label Security Systems label_important Home Alarm Systems category Accenta

e monno & gts?

Hello again....I only have limited Internet access at the moment,
the sound bomb has been wired following the install sheet,came with cable already attached.wired into a fused spurr taken off the 13 amp curcuit.
No mention on the sheet of where the plus and neg wires go inside the accenta.
Help would be much appreciated,
thanks for the prompt reply on my other post.

Eddie, August 2013

home Fix label Security Systems label_important Home Alarm Systems category Accentadone

true !!!!!!!!

gts, August 2013

Or not enough :D

e manno, August 2013

:-) :-) :-) (too much barley wine methinks !!! )

gts, August 2013

Blimey gts how fast you type mate!,

You not answered when I read the post :)

Well it did take me a while to find my specks :D

e manno, August 2013

I believe I just said that e monno ,er,e manno :-) :-)

gts, August 2013

10 out of 10 for mains wiring.
9 out of 10 for getting my name wrong.

Its manno,monno makes me sound like a r'tard or something.

Not to worry and your wiring:

D+=+VE (12V supply)

B-=-VE (sounder trigger)

The draw should be ok.

e manno, August 2013

no prob mate the low voltage wires go one side to neg of your bell box trig on the pc board,the other to the positive 12v once the panel is tripped the relay will latch on because your bell tripped hope this helps

gts, August 2013

link Click here to see other fixes for Accenta Plus.