1996 /97 had clutch differences - slave cylinder (hydraulic) on later design cost £50-60 online- strip off subframe -wheel on off -side- -keep subframe aligne if possible -loose bolts all round on sub-frame - remove off side wishbones - remove the 2 offside subframe bolts - keep trolley jack under gearbox to support -also make sure chassis is supported seperately- subframe should drop enough to pull G/box out from underneath after loose all bolts and disconnect clutch pedal -if you put in a complete new clutch-plate-diaphram and bearing you will not need to re-align it -so put it all together-H
Harry, March 2005
