home Fix label Security Systems label_important Home Alarm Systems category Scantronic

Scantronic reset?

I recently replaced the battery but now the display is showing U02 RESET NOT PERMITTED-LID TAMPER ?,
what does U02 mean and why can't i reset it?.

Morris, September 2013

home Fix label Security Systems label_important Home Alarm Systems category Scantronicdone

yes,but he say no !!!!!!!!!!!!!!!!!!!!!!! :-)

gts, September 2013

Defo gts.

Me can sell him nice 816 with stu and 16 expander and he can keep his keypads lol :) :)

Brill ain't it ? :D

e manno, September 2013

put in in a ditch pour petrol over it best thing mate
that rubbish about biscuits,a load of crap,dif colours for dif things,who ever thought that up must have been very high on dope crap system e manno

gts, September 2013

I've always found them a pain gts,got the 944 gathering dust,waste of money for the times I've used it.

Me love the scanny gear but I have a total dislike for moris's panel,it's not that I don't understand it lol,nah mate I never did take to it unfortunately,god knows I've tried. :)

e manno, September 2013

they where a pain when new e manno ,and they don't get any better

gts, September 2013

I'm concerned the panel didn't fire a tamper alarm when you removed the lid on the panel.

TBH moris I would suggest upgrading for a newer model or you could get engineer out,but he probably tell you the same.

Bit of a pain these IDIS panels in my opinion, and not really worth the fuss these days.

Good luck whatever you decide.

e manno, September 2013

I have read all your replies so thank you all,i figured that i would replace the battery as suggested by the previous owner,then use the alarm,so no i have not used it.I can not recall any alarm at all when i removed the metal lid,but I do remember both key pads showing the time:date,now both are showing the message i have questioned.

Morris, September 2013

Did your code silence the tamper alarm when you removed the lid?,or was another code used?.

Have you been using the system with this code prior to the battery replacement?.

Can't understand why you haven't been given user 1 code by the previos owner because user 2 etc can be programmed for ltd access or less authority than one.

Strange carry on here???

e manno, September 2013

true e manno

gts, September 2013

I can tell you that both keypad pcb's are the same, just different case styles, and at a guess you have the 8136 panel,unless you can tell us otherwise.

e manno, September 2013

Sounds like a Mosiac going on the rkp's gts.

Think he's going to need an engineer if he only has user 2 code.

Who knows how this panels been set up.

e manno, September 2013

help us to help you mate

gts, September 2013

follow e manno advice give more detail model etc

gts, September 2013

Only one light is lit on both keypads,but I did find a reference for both keypads which I believe are 930:931 if that helps.I have only been given one code by the previous owner who also said the battery was due for replacing.I did check that the metal lid was on ok,so thanks for that gts.

Thanks all.

Morris, September 2013

Also U02 is user code number two.
Do you have any other codes to try?.
User code one for example,also what lights are lit on the keypads other than the tamper?.

Use the add question box below to add additional info,start with the model of the panel,lights etc.

Sounds like you have created a tamper by removing the lid and it needs user1 or engineers code to reset :).

e manno, September 2013

check the lid tamper spring or micro switch is ok

gts, September 2013

A hint is in the term 'Lid Tamper', think about it.

acorn, September 2013

link Click here to see other fixes for Scantronic.