Had two go actually.
Previous engineer said he had not noticed it. But knew of the issue.
Alarm, October 2013
as I said before,cheap trash
gts, October 2013
you said it alarm guy,DIRE !
gts, October 2013
Had a Nova 6 go into tamper when triggered.
Apparently this is a known issue.
Dire
Alarm, October 2013
Take it this is a used unit.
Here's my advice, discharge the cap using your meter,unsolder the cap from the board then check it with an ESR meter if you have one.
Is the top ov the cap bulged or vented?.
If it's a new unit then check your wiring and dip switches for correct positioning.
Not a good start mate if this is new unit :(
e manno, October 2013
if all wiring is ok ,and panel is ok,and you have done the normal tests,and it aint working,get money back,buy a decent bell box nick,you know my opinion on these things
gts, October 2013
Take it back & get it replaced - Not fit for purpose. Simples.
