got a creda dry simplicity . I turned it on and all works but not getting hot . I replaced the x2 thermostats at the back of the machine and cleaned everything out but still not getting hot ? any help would be great help

THANKS

trev, December 2013

if you go to a suppliers website and type in your model
of dryer then search for replacement heaters and thermostats,compatible spares will list the information you seek.i couldnt possibly remember all spares ident codes sorry.good luck.

MR MARK GRIFFITHS, December 2013

alot of older dryers have a reset button
behind the cover you removed to replace
thermostats,a little red button,although your model doesnt have this facility,if for others reading this press red button once,after removing heater cover
located on the back of your dryer.just press once and
replace cover and operate normally.with the creda simplicity,as im working on one as we speak.if still no heat and your sure of all connections made by yourself/theres every chance its the heater element im afraid.you can get a complete heater element unit which comes as one piece with new thermostats in place,this is a relatively simple installation as is all colourcoded
wiring.take photo of old setup before removal for referencei know you put in new thermostats but i would use new ones that come with heater personally and keep others as spares.a complete unit is around
£18 -19 from places such as spares-to-go via e-bay.good luck.mr mark griffiths

MR MARK GRIFFITHS, December 2013

I was given x2 new ksd301 thermostat are they the correct ones for my t620cw creda tumble dryer

trev, December 2013