Hi if it's a fully integrated machine and the decor door comes right to the top of the machine door then it will be attached by 4 screws, open the door and remove the 2 screws holding the stainless inner door at the top corners (they should be long ones), then the middle ones either side, (long ones) then door should lift off its bottom brackets. If semi integrated (Has control panel visible from the front) then it will have 2 clamp screws in the sides of the door behind plastic bungs. Slacken these off ,don't remove and the door will lift off it's bottom brackets. Cheers
Kenjo, March 2014
