Hi, I am replacing the element. When I took the old element off I have 3 spade connectors, 2 spade connectors each with a double white wire with red markings and one spade connector with white wire with black marking marking. The element has a double spade connecter at each end of the coil and an earth terminal in between. can you advise on connection please?

Tony, March 2014

This needs to be right or you risk blowing the clock, switch and thermostat. ( Would have been better to have removed the oven and back panel and taken a picture of the wires first) Anyway on a positive note, if you can tell me where the wires go to, from the element onwards I can probably tell you. (most likely will be black on one side of the element and the 2 double reds on the other side of the element but need above info to be sure!)

Kenjo, March 2014