First unscew backcover and pull petrol tank out of the rubbers.
Than remove "front end" 4 torx20 scews.
Now you see the Clutch. Insert the torx20 key in the front hole. Put a 6mm shaft in one of the holes on the other side. The place where the tank was.
Unsrew the torx bolt. The free running part will come off. Leave the 6mm shaft in place and unscrew ccw the clutch.
Unscrew the 4 bolts that hold the front plastic cover.
Lift the cover and pull to the front.
Now you see the the starter cord mechanism.
Clean it and put a little silicone spray on it.
Do not use chain-spray, it is to sticky.
My Dutch is better than my English, but I hope you understand what I mean.
Take care......
GAOSQQ
G. Arnold van Os, February 2015
