GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

ldv convoy no ignition, lights, starting?

Have an 03 ldv convoy minibus at work, that doesn't work!
it cut out and now has no lights, ignition or starting. no dash lights etc.
have 12v at the brown wire on the back of ign switch but not the others. as soon as turn ign on no power at all at back of switch.
all fuses ok, no feed to ign fuse at dash,
immobiliser light in centre of dash flashes.
any ideas? have seen all the immobiliser problems online but they all seem to keep dash etc working.

thanks

j
jamie holmes, May 2014
hi i have a ldv recovey truck i was driving it and all the dash board light went out and their is no lights on the dash could you tell me what the problem is thanks

robin baker, February 2017
check main starter to battery lead,had a few of these give problems where lugs are crimped on.also ensure that engine and battery earth leads are clean and secure.make sure also that the ignition switch to loom connectors are good and tight fit ,[these can get hot and melt causing poor connection]

k, May 2014
Know there are problems with split windscreen rubbers,n/s lower corner allowing rain water to drip onto the ecu,maybe worth a look

cdc, May 2014
link Click here to see other fixes for LDV Convoy.