Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Click here to ask your question

home Fix label Security Systems label_important Home Alarm Systems

Melcom ST6000: I disconnect a sensor now a problem?

I disconnected one of the sensors on my Melcom ST6000 for decorating. When I reconnected it I get all zones flashing red, and none of the sensors do not blink as they used to. Any help please?
Hamid Agha, May 2014
home Fix label Security Systems label_important Home Alarm Systemsdone
Problem solved. When I disconnected the wires from the detector, I had not powered the system down. So the power wires had made contact and shorted the power fuse within the box.

Hamid Agha, May 2014

Fix Fault - Security Systems

home label Security Systems label_important Home Alarm Systems

Scantronic 9651 alarm?

Security Systems > Home Alarm Systems > Scantronic

Veritas 8?

Security Systems > Home Alarm Systems > Veritas

Tamper won't go off?

Security Systems > Home Alarm Systems > Scantronic

How to turn of tamper alarm on Logic Six house alarm?

Security Systems > Home Alarm Systems

Scantronic 9427 Alarm?

Security Systems > Home Alarm Systems > Scantronic

CEF AP28 alarm issue?

Security Systems > Home Alarm Systems

Veritas Alarm panel unable to set user code?

Security Systems > Home Alarm Systems > Veritas

Door sensors?

Security Systems > Home Alarm Systems

Fix Fault - Security Systems

home label Security Systems label_important Home Alarm Systems

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my Risco Gardtec 800?
How can I fix my Scantronic 9600?
How can I fix my Micromark MM23084?
How can I fix my Micromark MM9495B?
How can I fix my Veritas R8?