I unscrewed one of the oven doors to clean the glass on my Belling range style electric double ovens. It did take a bit of pulling to remove the door after the screws were loosened but after cleaning the glass and putting it back into place, I found that although the screws were going back into the holes they would not tighten again.

Kittykat, July 2014

If there are 2 of you, you can fix it by taking the back off which is easier than the side... 1 person reach in from the back and position the bracket ( its not easy to reach but I have done it) 2nd person put 1 screw in bracket without the door hinge to pull bracket into place, enter a 2nd screw through the hinge to hold the plate whilst you take out the 1st screw again and enter it through the hinge, then fit all 3. cheers

Kenjo, July 2014

I have the same problem with my Belling cook centre. It seems that there is a loose plate inside the casing which the screws tighten into and it has moved. I fear that the side casing is going to have to come off now. Any other ideas?

Steve, July 2014