can anyone tell me how to replace the drive belt on a peugeot speedfight 100

stuart, December 2006

changed the drivebelt on my speedfight 2 100cc it does not pull away how do i tieten the belt up

jamie, September 2011

my belt snapped i bourght a new one fitted it on and go to pull away and no power its an 53 plate speed fight 100cc any ancers ??

kieran, January 2011

its actually the lefthand side casing

dave skud, June 2009

how can i get the clutch off my peugeot speedfight with out f**ing the nut up? plz email wisec_004@hotmail.com thanks

charlie, April 2007

take the right hand engine case off leaving the kickstart lever bolted to the shaft and you will see a clutch at the back of the engine and a variator at the front,take the variator off by undoing the nut on the crankshaft and the belt will come off then replace it with the new one and reverse the procedure i would suggest using some loctite on the nut and crank as the have a habit off falling off ,ok

adam bike doctor, December 2006