I have a Zanussi Washer Dryer WJS 1465 W which is usually great but has become a bit tempremental!
After you set the programme and switch it on, it fills then juumps to the end of the programme, drains and stops!
I've checked the filter and it seems clear now although at first I got a lot of gunk out but the problem still persists.
Any ideas?
Thanks

Jill, September 2014

This fault can also appear if you have a fault with the electric motor, the machine will fill then when the motor is supposed to go but doesn't, the module will abort the program. Check in the base or under the machine if you see a cerated metal ring on the floor it has come out of the idle end of the motor and holds in an electric coil (a common problem) if not may be carbon brushes worn out in the motor.

Kenjo, October 2014

Jill, sounds like your module (behind the facia) has failed. We repair them at 47.88 + 6.00 postage. Send it to us with your name/address/daytime tel no. and we will repair it same-day. Tony EMW Electronics, Millfield, Oxton, Notts, NG25 0TD Tel 01159652118

Tony, October 2014